Ortofon MC Cadenza Blue
If you have any questions about this article, just contact our customer service.
Info Hotline:
If you can not reach us by phone, just use our contact form:Ortofon MC Cadenza Blue
Cadenza Blue is true to the music with a tremendous clarity.
The Cadenza Blue model is using a Nude FG 70 stylus with a very thin ruby cantilever.
The coils are made from 6NX (99.9999 %) pure silver wire.
An improved winding process on the armature allows a better channel balance.
The soundstage of Cadenza Blue is wide open and grandiose straight out of the box. Micro dynamic and ambience will be evident when listening to complex compositions. It reaches a very high degree of definition in the perspective, which is very present.
We have a comprehensive selection of Ortofon devices available for demonstration in our HiFi studios in Berlin-Kreuzberg. We look forward to your visit!
Model |
Ortofon MC Cadenza Blue |
Pickup Type: |
MC (low output moving coil) |
Output Voltage: |
0.50mV* |
Amplifier connector: |
Phono MC |
Channel deviation at 1 kHz: |
<1.2dB |
Crosstalk attenuation at 1kHz: |
>23dB |
Crosstalk attenuation at 15kHz: |
>15dB |
Frequency range: |
20-50,000Hz |
Frequency Response: |
20-20,000Hz +2dB/-1dB |
Sampling capability at 315Hz: |
80m** |
Needle Give: |
12µm/mN |
recomm. Tonearm Type: |
moderate |
Scan Diamond: |
Fritz Gyger 70, naked |
Fillet: |
r/R 6/70µm |
Tracking force range: |
22-27mN (2.2-2.7g) |
recomm. Tracking Force: |
25mN (2.5g) |
Scan Angle: |
20 degrees |
DC Resistance: |
5 ohms |
recomm. Terminator: |
50-200 ohms |
Case material: |
Stainless steel/aluminium |
Height: |
18mm |
Weight: |
10.7g |
Special features: |
Pure silver wire winding, ruby ??cantilever |
*at 1000Hz, 5cm/sec. **at recommended tracking force |