Ortofon MC Cadenza Red
If you have any questions about this article, just contact our customer service.
Info Hotline:
If you can not reach us by phone, just use our contact form:Ortofon MC Cadenza Red
The sound picture of Cadenza Red is relaxed, homogeneous and moderately dynamic and have great space and depth in the stereo image.
The Cadenza Red model is using a Nude Fine Line stylus with a cylindrical aluminium cantilever. The stylus tip radius is r/R 8/40 µm.
The coils are made from 6NX (99.9999 %) pure silver wire.
An improved winding process on the armature allows a better channel balance.
We have a comprehensive selection of Ortofon devices available for demonstration in our HiFi studios in Berlin-Kreuzberg. We look forward to your visit!
Model |
Ortofon MC Cadenza Red |
Pickup Type: |
MC (low output moving coil) |
Output Voltage: |
0.45mV* |
Amplifier connector: |
Phono MC |
Channel deviation at 1 kHz: |
<1.5dB |
Crosstalk attenuation at 1kHz: |
>23dB |
Crosstalk attenuation at 15kHz: |
>15dB |
Frequency range: |
20-50,000Hz |
Frequency Response: |
20-20,000Hz +3dB/-1dB |
Sampling capability at 315Hz: |
80m** |
Needle Give: |
12µm/mN |
recomm. Tonearm Type: |
moderate |
Scan Diamond: |
Fine Line, nude |
Fillet: |
r/R 8/40µm |
Tracking force range: |
22-27mN (2.2-2.7g) |
recomm. Tracking Force: |
25mN (2.5g) |
Scan Angle: |
20 degrees |
DC Resistance: |
5 ohms |
recomm. Terminator: |
50-500 ohms |
Case material: |
Stainless steel/aluminium |
Height: |
18mm |
Weight: |
10.7g |
Special feature: |
Wrap made of pure silver wire |
*at 1000Hz, 5cm/sec. **at recommended tracking force |