Ortofon MC Cadenza Bronze
If you have any questions about this article, just contact our customer service.
Info Hotline:
If you can not reach us by phone, just use our contact form:Ortofon MC Cadenza Bronze
Cadenza Bronze is a true high-end reference cartridge, conveying music with supreme precision, impact and dynamics.
The Cadenza Bronze model is using a Replicant 100 stylus and a conical aluminium cantilever.
The coil wire is the famous Ortofon Aucurum wire, which is a gold plated 6NX copper wire.
Field Stabilizing Element/FSE, is used for optimal linearity especially during complex crescendo passages.
Cadenza Bronze stereo imaging capabilities illuminate the farthest corners of the soundstage in all three dimensions.
We have a comprehensive selection of Ortofon devices available for demonstration in our HiFi studios in Berlin-Kreuzberg. We look forward to your visit!
Model |
Ortofon MC Cadenza Bronze |
Pickup Type: |
MC (low output moving coil) |
Output Voltage: |
0.40mV* |
Amplifier connector: |
Phono MC |
Channel deviation at 1 kHz: |
<1dB |
Crosstalk attenuation at 1kHz: |
>24dB |
Crosstalk attenuation at 15kHz: |
>20dB |
Frequency range: |
20-55,000Hz |
Frequency Response: |
20-20,000Hz ±1.5dB |
Sampling capability at 315Hz: |
80m** |
Needle Give: |
12µm/mN |
recomm. Tonearm Type: |
moderate |
Scan Diamond: |
Ortofon Replicant 100, naked |
Fillet: |
r/R 5/100 µm |
Tracking force range: |
22-27mN (2.2-2.7g) |
recomm. Tracking Force: |
25mN (2.5g) |
Scan Angle: |
23 degrees |
DC Resistance: |
5 ohms |
recomm. Terminator: |
50-200 ohms |
Case material: |
Stainless steel/aluminium |
Height: |
18mm |
Weight: |
10.7g |
Special features: |
Aucurum*** winding, conical aluminum cantilever, field stabilization element |
*at 1000Hz, 5cm/sec. **at recommended tracking force. ***Aucurum: Wire made of gold-plated, monocrystalline, oxygen-free 6N pure copper (OFC 99.9999%) |