Ortofon 2M Bronze Verso
If you have any questions about this article, just contact our customer service.
Info Hotline:
If you can not reach us by phone, just use our contact form:Ortofon 2M Bronze Verso
The 2M Bronze features a Nude Fine Line diamond, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners. Additionally, its larger footprint ensures reduced distortion and record wear.
The cartridge body is manufactured from Hopelex, a material which ensures high rigidity while eliminating unwanted resonances. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.
Ortofon optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.
We have a comprehensive selection of Ortofon devices available for demonstration in our HiFi studios in Berlin-Kreuzberg. We look forward to your visit!
Model |
Ortofon 2M Bronze Verso |
Pickup Type: |
MM (moving magnet) |
Output Voltage: |
5.5mV* |
Amplifier connector: |
Phono MM |
Channel deviation at 1 kHz: |
1dB |
Crosstalk attenuation at 1kHz: |
26dB |
Crosstalk attenuation at 15kHz: |
15dB |
Frequency range: |
20-29,000Hz |
Frequency Response: |
20-20,000Hz +2/-1dB |
Sampling capability at 315Hz: |
80m** |
Needle Give: |
22µm/mN |
recomm. Tonearm Type: |
light and medium weight |
Scan Diamond: |
Fine Line, nude |
Fillet: |
r/R 8/40µm |
Tracking force range: |
14-17mN (1.4-1.7g) |
recomm. Tracking Force: |
15mN (1.5g) |
Scan Angle: |
20 degrees |
DC Resistance: |
1.2k ohms |
Inductance: |
630mH |
recomm. Terminator: |
47k ohms |
recomm. Completion Capacity: |
150-300pF |
Case material: |
Lexan DMX |
Height (not PnP MkII): |
18mm |
Weight: |
7.2g |
Replacement needle tray: |
Stylus 2M Bronze |
Special feature: |
Winding made of silver-plated OFC copper wire |
*at 1000Hz, 5cm/sec. **at recommended tracking force |