€49.00
Incl. 16% VAT

Audio-Technica AT-VM95E

Elliptical MM Stereo Cartridge with Aluminium Cantilever
Delivery Time:
1-3 business days
In stock

If you have any questions about this article, just contact our customer service.

Info Hotline: +49 30 253 753 0

If you can not reach us by phone, just use our contact form:

AT-VM95E Elliptical Stereo Cartridge in the VM95 Series
The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

  • Aluminium cantilever
  • 4.0mV output voltage
  • Compatible body with all VM95 Series stylus assemblies
  • Replacement for AT95E and AT95EX
  • 20 to 22,000Hz frequency response

Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

The VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

 

Daniel Dimitrov
Model AT-VM95E
Type VM Stereo Dual Magnet
Mounting 1/2” centres
Frequency Response 20 - 22,000 Hz
Channel Separation 20 dB (1 kHz)
Output Channel Balance 2.0 dB (1 kHz)
Output Voltage 4.0 mV (@ 1 kHz, 5 cm/sec)
Vertical Tracking Angle 23°
Vertical Tracking Force Range 1.8 - 2.2g (standard 2.0 g)
Stylus Shape Elliptical
Stylus Size 0.3 x 0.7 mil
Stylus Construction Bonded Round Shank
Cantilever Aluminium Pipe
Coil Impedance 3.3 kΩ (1 kHz)
Coil Inductance 550 mH (1 kHz)
DC Resistance 485 Ω
Static Compliance 17 x 10 – 6 cm / dyne
Dynamic Compliance 7 x 10 – 6 cm / dyne (100 Hz)
Wire Used for Coil T.P. Copper
Recommended Load Impedance 47,000 Ω
Recommended Load Capacitance 100-200 pF
Cartridge Weight 6.1g
Dimensions 17.2 x 18.9 x 28.3 ( H x W x D mm)
Replacement Stylus AT-VMN95E
Accessories Included Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Your Rating
You're reviewing: Audio-Technica AT-VM95E Please note that customer entries are published subject to moderation, therefore they may not be immediately visible.
Our Store In Berlin

Our Store In Berlin

HiFi im Hinterhof
Großbeerenstraße 65/66
10963 Berlin-Kreuzberg

+49 30 253 753 0
eshop@hifi-im-hinterhof.de

Opening Hours Mon - Fri: 10 a.m. - 7 p.m.
Sat: 10 a.m. - 3 p.m.

Directions

Opening Hours Mon - Fri: 10 a.m. - 7 p.m.
Sat: 10 a.m. - 3 p.m.
Saxman

We Keep Up With The Latest

Visit Our HiFi & Friends Blog Now