Incl. 16% VAT

FiiO M11

High Resolution Player with Android, DSD Functionality and up to 32GB Storage
Delivery Time:
1-3 business days
In stock

This article can only be reserved and ordered by phone. Just contact our customer service.

Order Hotline: +49 30 253 753 0

If you can not reach us by phone, just use our order service via e-mail:

Fiio M11 - Audiophile Lossless Music Player


Explosive performance from the Samsung Exynos 7872
To ensure the user would have a great, powerful experience, we chose the hexa-core Samsung Exynos 7872 SoC to power the M11. With excellent performance comparable to the Snapdragon 625 and Kirin 659, you can be sure that the M11 will output your music without fail while provide an exceptionally fluid experience.

Dual AK4493 high-performance audiophile DACs
Inside the M11 are two AKM AK4493 DACs decoding your music. Compared to its AK4490 predecessor, not only has the signal-to-noise ratio(SNR) been doubled, but distortion has also been reduced by 1dB for greatly improved sound quality.

Truly balanced audio design
Inside the M11 is a special custom-made OPA926 op-amp chip, which has a lower noise floor, lower distortion, and overall cleaner power compared to the AD8397 op-amp. And the OPA926 is the only one high-quality part out of the M11’s highly optimized audio architecture designed to maximize sound quality, only achieved after constant iteration and improvement on the audio circuit.

Unbelievable sound that will seriously move you
Much work has been done to ensure the M11 has exceptionally good sound, especially with vocals and treble. The low-pass filter has been carefully adjust, major improvements were made to the power supply, and key components such as resistors and capacitors were upgraded – all resulting in the M11 reaching new heights in audio quality. FiiO’s engineers have worked tirelessly to make sure the M11 will sound great no matter which headphones you plug in.

Pushing the boundaries of wireless Hi-Fi
With its support of Bluetooth 4.2, the M11 can transmit the SBC/aptX/aptX HD/LDAC/LHDC Bluetooth format as well as receive certain formats. The M11’s high-performance Bluetooth radio ensures you can transmit signals further with stronger overall signal strength, so nothing can get in your way of enjoying quality wireless music.
* At launch, the M11 as receiver only support SBC. Receiving LDAC will be enabled in a future firmware update.

More choices for less headaches 2.5/3.5/4.4mm headphones output
Today, all high-end portable music players now include balanced headphone outputs. However, the M11 goes one step further by including both the 2.5mm and 4.4mm balanced output. No need for cumbersome adapters with the M11-simply just plug in your headphones to the right output jack!

Embrace the era of wireless with 2.4/5GHz dual-band Wi-Fi
With the M11’s dual-band Wi-Fi radio, you can expect better signal strength as well as faster and more stable connections-especially when using Wi-Fi on the 5GHz band to avoid interference 2.4GGz Bluetooth.

Straight lines that directly speak to
You won’t find any curves on the M11-rather, its body composed only of straight edges is the ultimate extension of the polygonal style, giving an radically distinctive yet visually arresting aggressive look.

18:9 HD touchscreen that your fingers will simply glide across
Adorning the front of the M11 is a large and colorful 5.15 inch 10-point multi-touch screen with 1440*720 resolution, giving you a more immersive experience and more space to easily execute gestures.

With a glass-backed design, the M11 has got your back
The thoroughly modern and sexy glass-backed design allows you to instantly make a tactile connection with the M11 with just the palm of your hand. The glass-backed features PET coating and the sophisticated carbon-fiber texture let others knows that the M11 means business.

Precisely adjust volume with the gold tactile volume wheel
Dding a bold splash of contrasting color to the all-black body is a gold-colored volume wheel, whose texture has been further improved and refined compared to previous player for an even better feel. In addition, the volume wheel is now dust resistant for even greater durability.

Get a quick surge of power with QC2.0 and MediaTek PE quick-charging technologies
Nobody wants to wait for charging. That’s why we have implemented the Quick Charge 2.0 and MediaTek Pump Express quick charging support on the M11, allowing it to only take 2.5 hours to full charge its large battery. And with the considerable 3800 mAh high-voltage battery, the M11 can continuously play music up to 13 hours and be placed in deep sleep standby for up to shopping 50 days.
*Quoted times are based on test result under typical conditions. Actual battery life will vary depending on playback volume and usage scenarios.

Open-source Android OS with a specially-designed FiiO music APP
The M11 features a deeply customized version of Android 7.0, with a highly optimized audio software architecture that circumvents SRC for global truly lossless audio. The FiiO Music APP was designed for audiophiles by audiophiles, with both a user interface that provides easy access to your music and an exclusive decoding algorithm for highest sound quality possible.
Note: Currently the Apple Music, Google Play and Google Play related services are unavailable.

Spend less time cleaning with more storage 3GB RAM + 32G storage
The copious 3GB of RAM ensures smooth multi-tasking, while the 32GB of storage plus two micro-SD card slots (each supporting up to 4TB card) means you can store thousands of lossless music without having to delete songs to free up space.

Instantly take control from your phone with FiiO link
After connecting your phone and the M11 via Bluetooth with the FiiO link functionality, you can remotely control the M11 with your phone as well as display what it’s currently playing.
*FiiO link is currently only supported on Android devices

Flexibly listen to your music with the convenience of DLNA and AirPlay
Do you have so much music that you can’t even fit them into the largest micro-SD cards? Then simply play them through DLNA for your PC or NAS, or via AirPlay for iOS devices for the ultimate in convenience.

Simply transfer music directly through Wi-Fi
Send songs to the M11 directly from your computer’s browser or your smartphone, saving you the hassle of hooking up the player to your computer with a USB cable.

Contemporary symmetrical USB Type-C connector
The M11 adopts the modern USB Type-C symmetrical connector, capable of both receiving and transmitting digital signals. This also means that the M11 is compatible with commonly-found USB Type-C chargers.

Asynchronous USB DAC supporting up to 384kHz/32bit audio

With USB audio out, you don’t have to stop the music
The M11 can support outputting a wide variety of formats through its USB connector, including DSD256, DoP/D2P, and native DSD modes. Simply connect the M11 to an external decoder, and you have a portable jukebox capable of delivering excellent sound wherever you go.

Multifunction output jack featuring SPDIF
Through the multifunction coaxial output jack, you can connect to a diverse range of external speakers, amplifiers, and decoders.

Global all to DSD functionality
With the all to DSD functionality, all PCM audio signals will be converted to the DSD format during the digital-to-analog conversion process-allowing one to experience a different yet natural and clear sound. Additionally, any sounds played through 3rd party apps are also affected by the all to DSD functionality.

Original PCM audio signal - PCM→DSD2.8M
With the all to DSD function on the M11, all PCM audio signals will be converted to the DSD format.

All-new dynamic EQ featuring 8 presets
The M11 features an all-new 10 band dynamic EQ supporting adjustments up to plug or minus 12dB. Listen to the built-in pop, blues, classical, jazz, rock, dance, metal and vocal equalizer presets or dial in your own customized EQ settings to get your music sounding the way you want them to.

Dual Hi-Res audio certifications
Not only is the M11 certified by the Japan Audio Society to be “Hi-Res Audio” capable, it is also the first product among its kind to carry the “Hi-Res Audio Wireless” certification.

Accessories included to cover all of your needs
The M11 is a transparent TPU protective case and a 7H tempered glass screen protector. The TPU protective case has been specially engineered to be tough enough to effectively protect the M11. And the screen from being scratched, it also boats a 90%+ light transmittance rate so your screen is still bright and easy to look at.
*Tempered glass screen protector is pre-applied from the factory.


Daniel Dimitrov

We have a comprehensive selection of Fiio devices available for demonstration in our HiFi studios in Berlin-Kreuzberg. We look forward to your visit!

Main Unit
Name / Model No. M11 OS Customized Android7.0
CPU model Exynos 7872 14nm No. of cores 6
CPU operating frequency 2GHz(A73×2),1.6GHz(A53×4) DAC AK4493EQ×2
Keyboard Virtual QWERTY keyboard Input method Multi-touch screen
Special features Android 7.0,No SRC restriction,All to DSD,2.5+3.5+4.4 output,Gesture control User interface Customized/FiiO Music
Chips used SoC: Samsung Exynos 7872,DAC:AK4493EQ*2,FPGA:A3P030,LPF:OPA1642×2,AMP:OPA926*2
Bluetooth chip:SAMSUNG S5N5C10B01-6330
WiFi 2.4/5G,WiFi transmission supported Bluetooth 4.2
USB TYPE C Two-way USB2.0 Bluetooth transmit LDAC/aptX/aptX HD/SBC(Available when playing on M11 or using M11 as USB DAC)
HWA(LHDC) Available when playing on M11 or using M11 as USB DAC Bluetooth receive SBC/LDAC (support in future firmware)
AirPlay Supported DLNA Supports Windows for now, will support more in the future
FiiO Link Supported NAS UPNP protocol supported
Display screen
Display size  5.15 inches Number of colours 16M
Display type IPS Hi-Res incell screen Viewable angle Full-view
Resolution 1440×720 Pixel density(PPI) 312
Touchscreen 10-finger multi-touch
Storage expansion type Micro SD crad ROM available to user About 25GB
Maximum storage expansion Theoretically 4TB (dual micro SD card slot)
Buttons and ports
Buttons Physical button+Side volume scroll+Touch screen Button customization N/A
Headphone out (PO)  3.5 mm headphone jack+2.5mm balanced headphone jack+4.4mm balanced headphone jack USB Two-way TYPE C USB2.0(Charging/Data transmisson/USB DAC/USB Audio)
Line out (LO) 3.5 mm port(shared PO) SPDIF output 3.5mm port(shared PO),DSD64/128,384kHz/32bit,DoP/D2P
Color Black Dimensions 70.5mm*130mm*15.5mm
Weight About 211g Volume control 120 steps 
Recommended headphone impedance 16~150Ω (3.5mm headphone output) Equalizer 10-band EQ (±6dB), 9 presets+custom preset
16~300Ω (2.5mm+4.4mm balanced output)
Treble control N/A Bass boost N/A
Balance control ±5dB Gain control L/H
USB DAC  Asynchronous 384kHz/32bit USB Audio DSD64/128,384kHz/32bit,DoP/D2P/Native
Power specifications
USB power adapter QC2.0/3.0 quick charger,PD2.0 charger,DC 12V/1.5A?9V/2A?5V/2A recommended Battery capacity 3800mAh 3.8V Li-polymer battery supporting quick charge
Charging indication Large charging icon shows on display when it's off, small charging icon shows on upper right of display when it's on Charging time <2.5h(DC 12V/1.5A)
<3h(DC 5V/2A)
Battery indication Yes (accurate battery % readings) Deep sleep time 50 days
Battery Life & Test Conditions
3.5mm headphone output:>13h
Volume 60 Load M3 open earbuds (27 Ω)
Screen OFF Test File MP3 44.1kHz/16bit
2.5mm+4.4mm balanced output:>9h
Volume 49 Load 32 Ω
Screen OFF Test File MP3 44.1kHz/16bit
Bluetooth output:>48h(LDAC)
Volume 60 Load BTR3+FH1
Screen OFF Test File MP3 44.1kHz/16bit
Firmware Upgrade Supports both via zip file and OTA Font size Supported
Clock Function Supported Third-party apps support Supports any app
Line output specifications
THD+N <0.001%(1kHz/10kΩ) SNR ≥115dB (A-weighted)
Frequency response 10Hz~90 kHz(-3dB) Noise floor  <6uV(20k low pass)
Channel separation >108dB (1kHz/10kΩ) Line level 1.95V (10kΩ)
Headphone out specifications 1(3.5mm port)
Output power 1 ≥255mW(16Ω / THD+N<1%) Output impedance <1Ω (32Ω)
Output power 2 ≥195mW(2.5V)(32Ω /THD+N<1%) THD+N <0.003%(1kHz/32Ω)
Output power 3 ≥22mW(300Ω / THD+N<1%) Separation >72dB (1kHz/32Ω)
Frequency response 10Hz~90 kHz(-3dB) Noise floor <5uV(20k low pass)
SNR ≥118dB (A-weighted, 32Ω)
Headphone out specifications 2(2.5mm+4.4mm balanced output)
Output power 1 ≥480mW(16Ω / THD+N<1%) Output impedance <2Ω (32Ω)
Output power 2 ≥550mW(4.2V)(32Ω /THD+N<1%) THD+N <0.002%(1kHz/32Ω)
Output power 3 ≥88.5mW(300Ω /THD+N<1%) Separation >107dB (1kHz/32Ω)
Frequency response 10Hz~90 kHz(-3dB) Noise floor <7uV(20k??)
SNR ≥118dB (A-weighted, 32Ω)
File formats support
Lossless: DSD:DSD64/128/256(“.iso”,“.dsf”,“.dff”),dst
APE FAST/High/Normal:384kHz/24bit(MAX)
APE Extra High:192kHz/24bit(MAX)
APE Insane:96kHz/24bit(MAX)
Apple Lossless:384kHz/32bit(MAX)
Lossy compression: MP3,OGG,WMA,AAC…
Your Rating
You're reviewing: FiiO M11 Please note that customer entries are published subject to moderation, therefore they may not be immediately visible.
Our Store In Berlin

Our Store In Berlin

HiFi im Hinterhof
Großbeerenstraße 65/66
10963 Berlin-Kreuzberg

+49 30 253 753 0

Opening Hours Mon - Fri: 10 a.m. - 7 p.m.
Sat: 10 a.m. - 3 p.m.


Opening Hours Mon - Fri: 10 a.m. - 7 p.m.
Sat: 10 a.m. - 3 p.m.

We Keep Up With The Latest

Visit Our HiFi & Friends Blog Now